Technical Sharing
2026/11/18
Can Industrial Automation Companies Meet Highly Customized Production Needs?
18
2026/11/
An automotive supplier wins a contract for a component that differs from its existing products in three ways: a revised housing, an additional inspection step, and a tighter installation space. Its production team now faces a practical question. Can automation accommodate those differences without turning every future product revision into another major equipment investment?
Yes, suitably experienced industrial automation companies can handle highly customized requirements. However, successful customization depends on defining which processes must be unique, which equipment can remain standardized, and how the finished line will demonstrate the required performance.

The Same Product Change Can Require Different Engineering
A new housing might need only a replacement fixture. It might also change how a robot grips the part, where a camera can inspect it, or whether an assembly tool can reach a fastening point. We recommend tracing each product difference through feeding, positioning, processing, testing, and unloading before selecting equipment.
This makes the requirements discussion more useful than a general request for a “flexible line.” Manufacturers should provide representative parts, drawings, tolerance limits, expected production volumes, and the planned product mix. Unconfirmed dimensions or material changes should be identified early because they can affect tooling design and process trials.
At FHS, our automotive automation portfolio covers intelligent cockpits, power systems, steering systems, braking systems, body systems, and electrical and electronic systems. Our equipment ranges from semi-automated assembly lines for central information displays to fully automated assembly and testing lines for brake control units. The published range also includes both semi-automated and fully automated equipment, allowing discussions to start with the actual application and production strategy.
For the illustrative supplier above, we would separate the housing change from the inspection requirement. One concerns mechanical access and handling; the other concerns measurement and acceptance. Treating them separately helps buyers understand what drives engineering effort and where an existing platform may still be suitable.
Where Industrial Automation Companies Can Reuse Proven Technology
Custom production equipment does not require every mechanism or software function to be developed from scratch. A line can combine established transport modules and control interfaces with dedicated fixtures, joining processes, and inspection stations. The engineering task is deciding where reuse supports the application and where a special design is necessary.
Our technical portfolio includes programmable logic controller (PLC) systems, motion control, laser welding, visual inspection, and embedded test systems. We also use a standardized program library and virtual simulation and debugging tools. These capabilities provide a basis for combining process-specific equipment with established engineering methods across a customized project.
Transport illustrates this distinction. Our FTS-MT product page describes replaceable movers and tooling, modular construction, and customizable workstations. Its basic parameter table specifies repetitive positioning accuracy of ±0.01 mm and a typical load of up to 40 kg. These values help screen suitability before detailed application engineering.
The fixture and product must still be evaluated together. We recommend checking their combined load, center of gravity, process forces, and required settling behavior. A transport platform’s positioning specification alone does not establish finished assembly accuracy; tooling, component tolerances, and the workstation process also contribute.
This approach keeps industrial automation solutions adaptable without promising unlimited compatibility. Buyers should ask which future changes are covered by tooling replacement, which need software modifications, and which would require additional stations. Those distinctions make flexibility a defined engineering capability rather than an open-ended sales claim.
A Battery Pack and a Medical Device Need Different Answers
Customization becomes especially important when production requirements differ by industry. Our new energy offering covers power battery module and pack lines, energy storage production lines, and battery cell equipment. The published battery pack range includes CTP, blade battery, and CTC solutions, with configurations adapted to different formats and production requirements.
A medical device project brings another set of priorities. FHS provides automated assembly, testing, and precision liquid filling equipment designed for cleanroom production. Our portfolio includes insulin pen, matrix retainer, and diagnostic kit production lines, alongside assembly and filling equipment for immunoassay reagents.
These differences affect how we discuss industrial automation solutions with manufacturers. Battery format compatibility cannot substitute for a medical project’s cleanliness requirements. Likewise, demonstrating accurate assembly does not by itself establish an adequate filling or inspection process. Each critical requirement needs its own design response and supporting evidence.
Software Must Accommodate the Production Sequence
Mechanical adaptability is only part of customization. A product variant may need a different dwell time, an additional workstation visit, or synchronization with external equipment. Buyers evaluating industrial automation companies should therefore examine control architecture and integration responsibilities alongside the mechanical layout.
Our iFCS control software documentation describes a standard PLCopen interface, individual mover control, configurable workstation scheduling, and support for user-driven secondary development. It also lists external workstation synchronization. These documented functions are relevant when assessing how transport behavior can match application-specific production sequences.
Before development, we recommend agreeing on recipe ownership, access permissions, equipment handshakes, and recovery procedures. For example, the specification should explain what happens when inspection rejects a part or a workstation becomes unavailable. Otherwise, a line may perform its normal sequence while remaining difficult to operate during routine exceptions.
Make Customization Visible in the Acceptance Plan
When reviewing proposals from industrial automation companies, buyers can check whether the supplier specifies how key requirements will be verified during acceptance testing. We recommend defining representative variants, sustained output conditions, inspection challenges, and changeover tasks before design approval. Changeover timing should include the agreed activities, such as tooling replacement, recipe selection, and first-piece verification, so both parties assess the same result.
At FHS, our industrial automation solutions bring together assembly, testing, controls, and flexible transport capabilities. A customized project succeeds when those capabilities fit the manufacturer’s parts, processes, and operating constraints. Buyers should leave the design review knowing what the line can accommodate today, what modifications tomorrow’s variants may require, and how both will be verified.
Public Relations Officer
Miss Zeng